Energy and energy value
Energy is not a substance or a material “calorie” but a fundamental physical capacity to perform work or induce change. In human nutrition, energy enters the body through the chemical bonds of macronutrients (proteins, fats, carbohydrates), is transformed within cells into ATP — the universal energy currency — and ultimately dissipates as heat, sustaining life, physical activity, and homeostasis. However, the energy that is truly available to the body (metabolizable or net metabolizable energy) depends not only on the food’s composition but also on the structure of the food matrix, thermal processing, gut microbiota composition, and even individual digestive variability — which is why a calorie measured in a bomb calorimeter is not always equivalent to a calorie assimilated by the body.
Key Concepts in Biological Energy for Human Nutrition
Main article: The Concept of Energy in Biological Systems: From Cellular Bioenergetics to Human Nutrition
This condensed summary presents the essential ideas from a comprehensive review of energy in biological systems, with a focus on human nutrition. It is intended for integration into a broader article. The full treatment includes detailed discussions of thermodynamics, cellular bioenergetics, energy expenditure measurement, allometric scaling, appetite regulation, and practical applications in dietary assessment and food labelling.
1. Thermodynamic Foundations
Energy in living systems follows the same physical laws as in the non‑living world. The first law of thermodynamics (energy conservation) means that the chemical energy of food is converted into other forms – ATP, heat, mechanical work – but never disappears. The second law (entropy increase) dictates that order inside a cell can be maintained only by releasing heat to the environment (Alberts et al., 2022).
The Gibbs free energy change (ΔG) determines whether a reaction can proceed spontaneously: ΔG < 0 favours product formation, ΔG > 0 requires energy input. Cells couple unfavourable reactions to ATP hydrolysis, which under physiological conditions releases approximately –46 to –54 kJ per mole (Alberts et al., 2022; Neufer, 2018).
Oxidation and reduction are electron transfers. NADH is a high‑energy electron donor (redox potential –0.32 V), while oxygen is a strong electron acceptor (+0.82 V). The electron‑transport chain captures this potential difference to pump protons and create a proton‑motive force (Neufer, 2018; Protasoni & Zeviani, 2021).
2. Energy Flow from Food to Cells
The energy content of food is measured in steps:
- Gross energy (GE): heat of combustion in a bomb calorimeter.
- Digestible energy (DE): GE minus faecal energy.
- Metabolizable energy (ME): DE minus urinary and gaseous energy (H2, CH4).
- Net metabolizable energy (NME): ME minus the heat of fermentation and obligatory thermogenesis (Livesey, 2001; Elia & Cummings, 2007).
For mixed diets, ME values (kJ/g) are approximately: fat 37, protein 17, available carbohydrate 17, dietary fibre 8, alcohol 29. NME values are lower for protein (13), fibre (6) and alcohol (26), because these substrates generate more heat when metabolised (Livesey, 2001; FAO, 2003).
3. Cellular ATP Synthesis
Glycolysis in the cytosol converts one glucose to two pyruvate, yielding 2 ATP and 2 NADH. Pyruvate enters mitochondria and is converted to acetyl‑CoA, which feeds into the tricarboxylic acid (TCA) cycle. One turn of the TCA cycle produces 3 NADH, 1 FADH2, and 1 GTP (Alberts et al., 2022).
NADH and FADH2 donate electrons to the electron‑transport chain (complexes I–IV). Complexes I, III and IV pump protons from the matrix to the intermembrane space, creating a proton‑motive force (ΔΨ ≈ –150 mV, ΔpH ≈ 0.5 units). ATP synthase (complex V) uses this gradient to rotate and synthesise ATP. In mammals, about 2.7 protons are required per ATP produced (Protasoni & Zeviani, 2021; Alberts et al., 2022).
4. Measuring Energy Expenditure
Indirect calorimetry measures oxygen consumption (VO2) and carbon dioxide production (VCO2). The Weir formula calculates energy expenditure (EE = 16.3·VO2 + 4.6·VCO2 – 2.2·urinary N). It is the standard for resting energy expenditure (REE) (EFSA, 2013).
Doubly labelled water (DLW) is the gold standard for free‑living total energy expenditure (TEE). Subjects drink 2H2O and H218O; the difference in elimination rates gives CO2 production. DLW has an accuracy of ± 5–8 % (EFSA, 2013; Neufer, 2018).
Direct calorimetry measures heat loss directly but is rarely used today except in thermoregulation research (Kenny, 2017).
5. Factorial Estimation of Energy Requirements
The factorial method estimates TEE as: TEE = REE × PAL, where PAL is the physical activity level (ratio TEE/REE). REE can be measured or predicted from equations (Henry, 2005; Schofield, 1985; Mifflin et al., 1990). EFSA (2013) recommends the Henry equations for European populations.
Physical activity level categories:
- Low active (sedentary): PAL = 1.4
- Moderately active: PAL = 1.6
- Active: PAL = 1.8
- Very active: PAL = 2.0
For children, an extra 1 % is added for growth. For pregnancy, additional energy is +0.29 MJ/day (70 kcal/day) in the first trimester, +1.1 MJ/day (260 kcal/day) in the second, and +2.1 MJ/day (500 kcal/day) in the third (EFSA, 2013).
6. Organ‑Tissue Heterogeneity
Resting energy expenditure is dominated by a few high‑metabolic‑rate organs. In a reference 70 kg man, the liver (1.8 kg) contributes 21 % of REE, brain (1.4 kg) 20 %, heart (0.33 kg) 8.5 %, kidneys (0.31 kg) 8 %. Skeletal muscle (28 kg) contributes only 21 % despite its large mass, and adipose tissue (15 kg) only 4 % (Heymsfield et al., 2021).
Ageing reduces REE primarily through loss of high‑metabolic‑rate organ mass and, to a lesser extent, decreased organ‑specific metabolic rates. Weight loss is accompanied by adaptive thermogenesis – a fall in REE of 50–100 kcal/day beyond that predicted by tissue loss – which may persist after weight stabilisation (Heymsfield et al., 2021; Neufer, 2018).
7. Allometric Scaling
Metabolic rate scales with body mass according to the allometric equation B = B₀·Mᵝ. For mammals, β ≈ 0.75 (Kleiber’s law), not 0.67 (surface law). The fractal vascular network model (West, Brown & Enquist, 1997) explains β = 3/4. Across the tree of life, prokaryotes show β > 1, unicellular eukaryotes β ≈ 1, and multicellular animals β < 1 (Ribeiro & Pereira, 2022).
For humans, intraspecific scaling gives a lower exponent (0.5–0.6 for REE vs. body weight) because of variation in fat mass. When fat‑free mass is used, the exponent rises to 0.7–0.8 (Heymsfield et al., 2021).
8. Regulation of Energy Intake
Glucostatic theory (Mayer, 1955) proposed that blood glucose drives hunger, but it has limited predictive power. Lipostatic theory (Kennedy, 1953) identified leptin as a long‑term adiposity signal. Leptin is produced by adipocytes in proportion to fat mass; leptin‑deficient individuals become massively obese, but most obese people are leptin‑resistant (Carreiro et al., 2016).
Gut hormones act as short‑term signals: ghrelin (orexigenic, rises before meals), CCK (anorectic, reduces meal size), GLP‑1 and PYY (anorectic, released by nutrients, especially fermentable fibre). Fermentable carbohydrates produce short‑chain fatty acids that stimulate L‑cells to release GLP‑1 and PYY – the “colonic brake” (Elia & Cummings, 2007; Carreiro et al., 2016).
Central control involves the arcuate nucleus (NPY/AgRP vs. POMC/CART neurons), the nucleus of the solitary tract (vagal input), and dopamine reward circuits. Highly palatable, energy‑dense foods can override homeostatic signals, promoting overconsumption. The “food addiction” model is debated; the magnitude of dopaminergic response to food is much smaller than to drugs of abuse (Carreiro et al., 2016).
9. Food Energy Analysis and Labelling
Food composition tables convert grams of macronutrients into energy using standard factors. For general labelling, ME factors are used:
- Fat: 37 kJ/g (9 kcal/g)
- Available carbohydrate: 17 kJ/g (4 kcal/g) (or 16 kJ/g as monosaccharide equivalents)
- Protein: 17 kJ/g (4 kcal/g)
- Dietary fibre: 8 kJ/g (2 kcal/g)
- Alcohol: 29 kJ/g (7 kcal/g)
For polyols, NME factors (10 kJ/g or 2.4 kcal/g) are required in the EU. The FAO recommends direct analysis of available carbohydrate rather than “by difference” (FAO, 2003; Bernan, 2004).
Dietary surveys convert reported food intake into energy intake using these factors. However, under‑reporting (often > 20 % of TEE) is common, especially in overweight individuals (EFSA, 2013).
10. Practical Applications in Nutrition Science
- Dietary reference values: EFSA (2013) publishes average requirements (AR) for energy for European populations, calculated as REE × PAL for each age‑sex group, with reference heights and weights giving a BMI of 22 kg/m2.
- Epidemiology: Energy adjustment (e.g., % energy from fat, residual method) is essential to avoid confounding when studying nutrient‑disease associations (Livesey, 2001).
- Sports nutrition: Energy availability (EA = (EI – EEE)/FFM) is used to assess adequacy for athletes. PAL values above 2.0 are common.
- Food policy: Energy labelling informs consumers, but the difference between ME and NME for high‑fibre products can lead to overestimation of available energy.
11. Limitations and Future Directions
Current predictive equations for REE have individual errors of 5–15 %. PAL from self‑report is inaccurate; accelerometry and DLW are better but not routine. The gut microbiome alters fibre fermentability, affecting NME. Adaptive thermogenesis after weight loss remains incompletely understood (Heymsfield et al., 2021; Neufer, 2018).
Future research should focus on:
- Incorporating body composition into bedside REE equations.
- Personalising energy conversion factors for fibre based on microbiome analysis.
- Validating continuous PAL estimates from wearable sensors against DLW.
- Deciding whether to adopt NME globally for food labelling.
12. Key Takeaways
- Energy is a capacity, not a substance; it is transformed, not consumed.
- The ATP cycle couples exergonic catabolism to endergonic anabolism.
- Metabolizable energy (ME) is the conventional standard, but net metabolizable energy (NME) better reflects ATP‑generating capacity.
- Resting energy expenditure is dominated by a few organs; body mass alone is a crude predictor.
- Allometry (β ≈ 0.75) emerges from the physics of transport networks.
- Appetite regulation involves redundant hormonal and neural signals that are easily overridden by the modern food environment.
- Factorial estimation (REE × PAL) is the basis for population energy requirements; individual prediction remains imprecise.
Understanding these layers – from ATP synthase to allometry – is essential for using energy concepts wisely in nutrition science.
Chemical Energy Carriers in Food: Key Points
Main article: Chemical Energy Carriers in Food: From Bomb Calorimeter to Human Metabolism
Energy is not a single number
The energy value of food can be measured in four different ways: gross (bomb calorimeter), digestible (minus faecal losses), metabolisable (ME, minus urine and gases), and net metabolisable (NME, also minus fermentation heat and obligatory thermogenesis). ME (the Atwater system, 4‑4‑9 kcal/g) is still used on most labels, but it systematically overestimates the energy value of protein‑rich and fibre‑rich foods (Livesey 2001; Elia & Cummings 2007).
The oxidative hierarchy
Alcohol > protein > carbohydrate > fat in oxidation priority. Alcohol cannot be stored and must be oxidised first; protein and carbohydrate have small body pools; fat has virtually unlimited storage. Consequently, dietary fat is efficiently stored rather than oxidised, promoting passive overconsumption when energy density is high (Prentice 2005).
Net metabolisable energy (NME) is physiologically superior
NME factors (kJ/g): fat 37, protein 13, available carbohydrate 16, fermentable fibre 6, alcohol 26. These values come from human calorimetry and ATP stoichiometry, and they make energy values comparable across macronutrients (Livesey 2001).
The food matrix matters
Intact plant cell walls (nuts, legumes, whole grains) can reduce lipid and starch digestibility by 20–30% because nutrients are physically inaccessible to digestive enzymes. Processing (milling, extrusion, heating) disrupts these barriers and increases energy availability (Capuano et al. 2018). For example, almonds deliver about 460 kcal/100g instead of the label value of 629 kcal/100g (Novotny et al. 2012, cited in Capuano 2018).
Practical discrepancies
Using food‑specific digestibility coefficients, a Western diet shows a 0–2% overestimation by label values, a Mediterranean diet 4–6%, and a vegan diet 8–10%. Thus, people who switch to whole‑food plant‑based diets actually consume 5–10% fewer net calories than the label sum suggests (Capuano et al. 2018).
Label calories are not physiological calories. A calorie from a whole almond differs from a calorie from refined sugar; a calorie from protein differs from a calorie from fat. Understanding the system behind the number – especially the NME framework and matrix effects – allows more informed food choices without obsessive counting.
Principles of Food Energy Measurement
Main article: Principles and Methods of Measuring the Energy Value of Foods in Human Nutrition
This condensed summary highlights the essential concepts and methods for measuring the energy value of foods in human nutrition, based on the detailed review presented in the full article.
Gross energy: the starting point
The total chemical energy in a food is called gross energy (heat of combustion). It is measured using bomb calorimetry: a dried, homogenised sample is burned in a pressurised oxygen chamber, and the released heat is measured (Hopper et al., 2023). Gross energy values differ between macronutrients: fats ~39 kJ/g, proteins ~23–24 kJ/g, available carbohydrates ~15.5–17.5 kJ/g, dietary fibre ~17 kJ/g (Elia and Cummings, 2007). However, the human body does not extract all this energy.
From gross to digestible energy
Digestible energy (DE) is gross energy minus faecal and gaseous losses (mainly H2 and CH4). For digestible carbohydrates and fats, DE is nearly equal to gross energy. For fibre and resistant starch – which pass into the colon – fermentation yields short‑chain fatty acids (absorbed) but also gases and bacterial biomass. For mixed diets, the DE of non‑starch polysaccharides is only about 7–8 kJ/g, compared to gross ~17 kJ/g (Elia and Cummings, 2007; Livesey, 1995).
Metabolizable energy (ME) – the Atwater system
Metabolizable energy (ME) subtracts urinary losses (mainly urea from protein) from DE. The classic Atwater system (Atwater, 1910; Merrill and Watt, 1973) assigns average factors: protein 17 kJ/g (4 kcal/g), fat 37 kJ/g (9 kcal/g), total carbohydrate 17 kJ/g (4 kcal/g), alcohol 29 kJ/g (7 kcal/g). Specific Atwater factors give different values for different foods. The ME system is simple and remains the legal standard for food labelling in most countries (FAO, 2004). However, it overestimates energy from high‑fibre and high‑protein foods and ignores differences in metabolic efficiency (Sánchez‑Peña et al., 2017; Zou et al., 2007).
Net metabolizable energy (NME) – a bioenergetic advance
Net metabolizable energy (NME) accounts for the fact that different substrates generate ATP with different efficiencies. For example, protein yields only about 80% as much ATP per kJ of ME as glucose; fermentable fibre gives about 74% (Livesey, 2001; Elia and Cummings, 2007). The relative efficiency coefficient `k` (glucose = 1.0) is determined both theoretically (by metabolic stoichiometry) and experimentally (by 24‑h indirect calorimetry in humans). NME values are: protein 13 kJ/g, available carbohydrate 15.7–16 kJ/g, fermentable fibre 6–8 kJ/g, fat 37 kJ/g, alcohol 26 kJ/g. NME is scientifically superior but not yet adopted for routine labelling due to regulatory and economic inertia (FAO, 2004).
Factors that modify real energy availability
Actual energy extraction varies with:
- Dietary fibre and resistant starch – reduce ME by 30–50% compared to digestible starch (Livesey, 1995).
- Tree nuts – whole almonds, walnuts, etc. provide 5–21% less energy than Atwater‑calculated values because intact cell walls protect lipids (Baer et al., 2016; Novotny et al., 2012).
- Energy balance – overeating slightly increases faecal losses; undereating triggers adaptive conservation (Yoshimura et al., 2026).
- Food processing and mastication – grinding, cooking, and thorough chewing increase digestibility (Hopper et al., 2023).
These differences can reach 10–20% for individual foods and are not captured by label values.
Practical implications
- For mixed diets, the Atwater ME system is a useful approximation (error usually 2–5%).
- For high‑fibre, high‑protein, or low‑energy products, NME gives a more truthful estimate.
- Consumers should not blindly compare label kilojoules; whole, fibre‑rich foods often provide less utilisable energy than refined products with the same ME.
- Harmonisation of carbohydrate and fibre analysis methods is urgently needed (FAO, 2004; Matthews, 1995).
Understanding the hierarchy – gross energy → DE → ME → NME – allows nutrition professionals and informed consumers to interpret food labels critically and make better dietary choices.
From chemical energy to bioavailable energy: digestibility and absorption in human nutrition
Main article: From Chemical Energy to Bioavailable Energy: Digestibility and Absorption in Human Nutrition
The energy content declared on food labels is typically calculated using the Atwater general factors (4 kcal/g for protein and carbohydrate, 9 kcal/g for fat). These factors assume near‑complete digestion and absorption of macronutrients in the small intestine. However, the actual metabolizable energy (ME) of a food depends critically on its physical structure, processing history and the composition of the consumer’s gut microbiota (Carmody & Wrangham 2009; Capuano et al. 2018).
Starch in raw plants is semi‑crystalline and resists pancreatic amylase. Cooking with moist heat gelatinises starch, increasing ileal digestibility by 28–200 % and raising ME by 12–35 % (Carmody & Wrangham 2009). Conversely, cooling cooked starchy foods promotes retrogradation, generating resistant starch (RS3) that is fermented in the colon with only about 50 % of the energy yield of small‑intestinal absorption (Elia & Cummings 2007). Intact plant cell walls act as physical barriers: lipids and starch trapped inside unbroken cells escape digestion entirely. In human studies, the measured ME of raw almonds is 26 % lower than the Atwater prediction, and even roasted almonds remain 19 % lower (Nikodijevic et al. 2023). Particle size reduction by grinding increases bioaccessibility, but only heat can fully gelatinise starch and denature proteins effectively (Capuano et al. 2018).
Protein digestibility is also structure‑dependent. Mild moist heat denatures proteins and inactivates trypsin inhibitors – cooked egg protein is 91–94 % digestible compared with 51–65 % for raw egg. However, intense dry heat promotes Maillard reactions and protein aggregation, reducing digestibility (van Boekel et al. 2010).
The large intestine salvages some energy from undigested substrates via microbial fermentation. Short‑chain fatty acids (SCFAs) produced from resistant starch and dietary fibre can provide 5–15 % of daily energy requirements, but the efficiency of this pathway is only 35–50 % of that of small‑intestinal absorption (Elia & Cummings 2007). Moreover, inter‑individual variation in the gut microbiota – particularly the presence of methanogenic archaea – significantly influences ME from high‑fibre diets (Dirks et al. 2025; Roager & Christensen 2022).
For whole, minimally processed plant foods (nuts, seeds, whole grains, legumes), the Atwater factors systematically overestimate ME by 5–26 %, whereas for highly processed, refined foods the label value is more accurate. A Mediterranean or vegan diet may deliver 5–8 % fewer calories than the label suggests (Capuano et al. 2018). Recognising these matrix and processing effects is essential for accurate energy assessment, dietary advice and future food labelling systems.
How the Body Expends Energy
Main article: How the Body Expends Energy: Components of Energy Expenditure
Total daily energy expenditure (TDEE) is not a single process but the sum of three distinct components: resting energy expenditure (REE), physical activity energy expenditure (PAEE), and the thermic effect of food (TEF) (Fernández-Verdejo, Sanchez-Delgado & Ravussin 2024). Understanding how the body spends energy is essential for nutrition science, as it explains why people of the same weight can have different metabolic rates and why weight loss often triggers compensatory slowing of metabolism.
The Three Pillars of Daily Energy Expenditure
In a sedentary adult, REE accounts for 60–75% of TDEE, PAEE for 15–30%, and TEF for 5–15% (Aragon et al. 2017). These proportions shift with activity, diet, and environment.
Resting energy expenditure (REE) is the energy needed for vital functions while at rest, fasting, and in a thermoneutral environment. REE is largely determined by the mass of high‑metabolic‑rate organs: the brain, liver, heart, and kidneys together comprise only 5–7% of body weight but contribute 60–70% of REE. Skeletal muscle, despite its large mass, contributes only about 20–25% (Heymsfield et al. 2018; Heymsfield et al. 2021). This explains why two individuals of the same weight can have different REE: differences in organ and tissue composition matter.
Physical activity energy expenditure (PAEE) is the most variable component. It includes both structured exercise (EAT) and non‑exercise activity thermogenesis (NEAT) – fidgeting, posture maintenance, spontaneous movements. NEAT can differ by as much as 2000 kcal/day between two people of similar size (Aragon et al. 2017). NEAT is also a major contributor to adaptive thermogenesis: when people lose weight, they unconsciously reduce NEAT, slowing further loss (Dulloo & Schutz 2015).
Thermic effect of food (TEF) is the energy cost of digesting, absorbing, and processing nutrients. TEF follows a clear hierarchy: protein (20–30% of its energy content) > carbohydrate (5–15%) > fat (0–5%). Alcohol has a TEF similar to protein (10–30%) (Westerterp 2004). High‑protein meals not only increase postprandial energy expenditure but also reduce hunger through gut hormones such as GLP‑1 and PYY (Bosy-Westphal, Hägele & Müller 2021).
How Scientists Measure Energy Expenditure
Indirect calorimetry measures O2 consumption and CO2 production. Ventilated‑hood systems measure REE in 20–30 minutes; whole‑room metabolic chambers measure TDEE and its components over 24 hours under controlled conditions (Fernández-Verdejo, Sanchez-Delgado & Ravussin 2024).
Doubly labelled water (DLW) uses stable isotopes (2H and 18O) to measure average TDEE over 7–14 days in free‑living individuals. It is the gold standard for field studies but does not separate TDEE into its components (Fernández-Verdejo, Sanchez-Delgado & Ravussin 2024).
Direct calorimetry (measuring heat production directly) is historically important but rarely used today due to technical limitations (Aragon et al. 2017).
What Regulates Energy Expenditure?
Body composition is the single most important determinant of REE. Men have higher absolute REE than women because they have larger organs and more muscle; when adjusted for fat‑free mass and fat mass, sex differences largely disappear (Lazzer et al. 2010).
Age affects REE in four phases: very high in infancy (growth), stable from age 20–60 (when adjusted for body composition), and declining after 60–65 due to loss of organ mass and physical activity, not an inevitable “metabolic slowdown” (Fernández-Verdejo, Sanchez-Delgado & Ravussin 2024).
Protein intake influences energy expenditure through three mechanisms: (1) high TEF (20‑30%), (2) increased satiety leading to spontaneous calorie reduction, and (3) activation of the mTOR pathway by leucine, which stimulates protein synthesis – an energy‑intensive process (Corsetti et al. 2024; Carreiro et al. 2016). Quality matters: all essential amino acids must be present for efficient synthesis.
Adaptive thermogenesis is the decrease in EE during caloric restriction beyond what is explained by weight loss. It can reach 200‑500 kcal/day and is a major reason for weight loss plateaus and weight regain. The effect is largely driven by reduced NEAT (85‑90%) and can be attenuated by preserving lean mass (high protein + resistance training) and maintaining activity (Dulloo & Schutz 2015; Aragon et al. 2017).
Environmental temperature affects EE: mild cold increases EE (100‑300 kcal/day) but also increases appetite. Heat tends to reduce food intake but slightly lowers EE (Bosy-Westphal, Hägele & Müller 2021).
Sleep loss increases TDEE slightly (longer wakefulness) but increases energy intake much more (200‑500 kcal/day) through hormonal changes (leptin ↓, ghrelin ↑) and altered reward processing, promoting weight gain (Bosy-Westphal, Hägele & Müller 2021).
Hidden Energy Costs: Protein Turnover
Every day, the body breaks down and resynthesises 250‑350 g of its own proteins. This protein turnover accounts for about 20% of REE – 300‑400 kcal/day in an average adult. Protein synthesis requires ~4 ATP per peptide bond and is highly sensitive to the availability of all essential amino acids, especially leucine (Corsetti et al. 2024). Low protein intake reduces turnover and lowers REE; adequate high‑quality protein (1.2‑1.6 g/kg/day for active adults, up to 2.4 g/kg/day during energy deficit with resistance training) supports muscle maintenance and metabolic rate.
Key Practical Takeaways
- Body composition matters more than body weight. Predicting energy needs from weight alone is imprecise.
- Protein is a metabolic regulator, not just a building block. High‑protein diets increase EE and reduce hunger.
- NEAT (spontaneous movement) is a hidden lever for energy expenditure. Small daily activities add up.
- Adaptive thermogenesis is real but can be minimised by slow weight loss, adequate protein, resistance training, and maintaining activity.
- Sleep duration (7‑9 h/night) is an important, often overlooked component of weight management – primarily through its effect on energy intake, not expenditure.
- Energy expenditure changes across the life course, but much of the age‑related decline is preventable through resistance exercise and protein intake.
Energy expenditure is not a passive “calorie burn”. It is an active, regulated, and highly adaptive process involving distinct components (REE, PAEE, TEF), hidden costs (protein turnover, NEAT), and compensatory mechanisms (adaptive thermogenesis). Understanding these principles helps explain individual variability in weight loss and maintenance, and provides a scientific foundation for evidence‑based nutrition recommendations.
Energy Balance: Intake, Expenditure, and Dietary Reference Values
Main article: Energy Balance: Intake, Expenditure, and Recommended Dietary Reference Values
Energy balance is the relationship between energy intake from food and total energy expenditure (TEE). When intake equals expenditure over a sustained period, body weight remains stable; a chronic surplus leads to weight gain, and a deficit leads to weight loss (Speakman & Hall, 2023).
Energy intake is derived from carbohydrates (4 kcal/g), fats (9 kcal/g), proteins (4 kcal/g), and alcohol (7 kcal/g). Dietary fibre contributes approximately 2 kcal/g after colonic fermentation (EFSA, 2013; NASEM, 2023). These Atwater factors are used universally to calculate the energy content of foods.
Energy expenditure has three main components: resting energy expenditure (REE, 60–70% of TEE), the thermic effect of food (TEF, ~10%), and physical activity energy expenditure (PAEE, 15–50%). TEE is measured most accurately by the doubly labelled water (DLW) method, which has become the gold standard for free‑living individuals (NASEM, 2023; Bosy‑Westphal et al., 2021).
Estimated Energy Requirement (EER) is the central dietary reference value for energy. It is the average intake predicted to maintain energy balance in a healthy person of defined age, sex, weight, height, and physical activity level (PAL). Four PAL categories are commonly used: inactive (1.0–1.4), low active (1.4–1.6), active (1.6–1.9), and very active (1.9–2.5). Additional allowances are added for growth, pregnancy, and lactation (EFSA, 2013; NASEM, 2023).
All recent DRI frameworks – EFSA (2013), NASEM (2023), Russian MR 2.3.1.0253‑21, Chinese DRIs (2023), and Nordic NNR2023 – share the same factorial approach but differ in reference weights and PAL cutoffs. For a 30‑year‑old, 70 kg, 170 cm male with moderate activity, EER ranges from 2,550 to 2,750 kcal/d depending on the framework.
In practice, EER should be calculated, followed by monitoring of body weight. If weight is stable, intake matches requirement; if undesired change occurs, adjust by ±200–300 kcal/d. Self‑reported energy intake (24‑h recalls, food diaries) is systematically under‑reported by 10–30% and should not be used to judge adequacy – weight stability is the best proxy (NASEM, 2023).
Uncertainties include individual prediction error (SEPV ≈240–340 kcal/d), limited DLW data from non‑Caucasian populations, and the precise energy cost of pregnancy in women with obesity. Nevertheless, current EER equations provide the best available evidence‑based guide for energy requirements.
Factors Modifying the Energy Value of the Diet
Main article: Factors Modifying the Energy Value of the Diet: Why a Calorie Is Not Always a Calorie
The energy value of food as listed on nutrition labels is typically calculated using the Atwater general factors (4 kcal/g for protein and carbohydrate, 9 kcal/g for fat). However, a growing body of evidence demonstrates that the metabolizable energy—the energy actually available to the human body—can differ substantially from these theoretical values. This brief summary outlines the key factors that modify dietary energy availability.
1. The Food Matrix as a Natural Capsule
In plant-based foods, intact cell walls composed of indigestible dietary fiber (cellulose, hemicelluloses, pectins) physically encapsulate starch, lipids, and proteins (Grundy et al., 2016). If cells remain intact at the moment of swallowing, encapsulated macronutrients pass through the small intestine without being hydrolyzed. Studies using ileostomy patients have recovered intact cells filled with starch from white beans and almond particles with lipid-filled cores (Capuano et al., 2018).
Mastication (chewing) determines the extent of cell wall disruption. Hard, brittle tissues (nuts, raw vegetables) fracture, creating particles with both ruptured (accessible) and intact (inaccessible) cells. Soft tissues (cooked legumes) often separate without rupture, preserving the encapsulation barrier. For a 2 mm wheat particle, approximately 62% of starch remains encapsulated; for a similarly sized almond particle, the vast majority of lipid remains inaccessible (Capuano et al., 2018).
Food texture also governs eating rate. A controlled trial showed that consuming hard-textured versus soft-textured foods of identical energy density reduced daily energy intake by 33% (Lasschuijt et al., 2023). Soft, ultra-processed foods promote passive overconsumption by allowing faster ingestion before satiation signals develop.
2. Thermal and Industrial Processing: The Dual Role of Heat
Moderate heating (boiling, steaming) increases energy availability by gelatinizing starch (making it susceptible to α-amylase), denaturing proteins (exposing peptide bonds), and inactivating heat-labile anti-nutrients (trypsin inhibitors, amylase inhibitors) (Carmody & Wrangham, 2009; Capuano et al., 2018). Cooking increases ileal starch digestibility from 71% to 96% in wheat and from 47% to 98% in green bananas.
Excessive heating has opposite effects. The Maillard reaction between reducing sugars and free amino groups (lysine, arginine) blocks trypsin cleavage sites and forms indigestible melanoproteins. Bread crust protein digestibility is significantly lower than that of crumb (Khalid et al., 2023). High-temperature frying oxidizes lipids, reducing fat digestibility by up to 30% in animal models (Capuano et al., 2018). Cooling cooked starchy foods (potatoes, rice, pasta) promotes starch retrogradation, forming resistant starch type III (RS3), which provides only 2 kcal/g compared to 4 kcal/g for digestible starch (Capuano et al., 2018).
3. Chemical Composition and Nutrient Interactions
Resistant starch (RS1–RS5) and non-starch polysaccharides escape small intestinal digestion. Upon colonic fermentation, they yield approximately 2 kcal/g as short-chain fatty acids (SCFAs), substantially less than the 4 kcal/g from glucose oxidation (Louis et al., 2021). Anti-nutritional factors—phytates, tannins, trypsin inhibitors—reduce protein and mineral bioavailability unless inactivated by heat (Capuano et al., 2018).
The thermic effect of food (TEF) varies dramatically by macronutrient: protein requires 20–30% of its gross energy for processing, carbohydrate 5–10%, fat 0–3% (Westerterp et al., 1999; Tzeravini, 2024). Thus, a high-protein meal yields significantly less net metabolizable energy than a high-fat meal of identical gross caloric value. Dietary calcium can form insoluble fatty acid soaps, increasing fecal fat excretion by approximately 5.2 g/d per 1241 mg of dairy calcium (Capuano et al., 2018).
4. Digestive Variability and the Gut Microbiota
Colonic fermentation of resistant carbohydrates depends on specific microbial species. Ruminococcus bromii is a keystone species for degrading resistant starch; individuals lacking this species excrete undigested starch in feces (Louis et al., 2021). Microbial cross-feeding networks involving primary degraders and secondary fermenters determine the efficiency of energy extraction from dietary fiber. Ultra-processed diets low in fermentable fiber reduce microbial diversity and promote dysbiosis (Arowora et al., 2025).
5. Practical Implications
Current food labels systematically overestimate metabolizable energy for whole plant foods: almonds by ~30%, walnuts by 21%, pistachios by 5% (Baer et al., 2016; Capuano et al., 2018). For a high-fiber vegan or Mediterranean diet, the overestimation amounts to 4–8% of total daily energy.
Evidence-based strategies to reduce net energy intake include: choosing whole nuts over nut butters, intact grains over refined flours, cooled starches over freshly boiled, and whole fruits over juices. These approaches reduce metabolizable energy without reducing food volume or increasing hunger.
A calorie measured in a bomb calorimeter is not equivalent to a calorie processed by the human digestive system. The metabolizable energy of the diet is modified by food matrix integrity, processing history, nutrient–nutrient interactions, and individual digestive physiology. Recognizing these factors is essential for accurate dietary assessment, effective weight management strategies, and informed consumer choice.
Key misconceptions about dietary energy
Main article: Typical misconceptions about energy in nutrition: analysis and debunking
1. ‘A calorie is a calorie’ violates the second law of thermodynamics
The idea that isocaloric diets produce identical metabolic effects ignores the second law of thermodynamics. Different macronutrients follow different metabolic pathways with different efficiencies. The thermic effect of food is 0–3% for fat, 5–10% for carbohydrate, and 20–30% for protein (Tzeravini et al., 2024). Protein also activates mTOR signalling, preserving lean mass and increasing satiety (Corsetti et al., 2024). Fructose drives hepatic de novo lipogenesis more potently than glucose (San‑Cristobal et al., 2020). Thus, a calorie from protein is not equivalent to a calorie from fructose, and both differ from a calorie from fat (Feinman & Fine, 2004; Feinman & Fine, 2007).
2. ‘Calories in’ and ‘calories out’ cannot be accurately measured
Food labels and restaurant menus often misreport energy content by >20% (Finlay et al., 2025). Even the Atwater factors overestimate metabolizable energy of nuts by 5–30% because intact cell walls limit nutrient release (Baer et al., 2016; Capuano et al., 2018). Consumer wearables have mean absolute percentage errors of 15–50% (Liu et al., 2025). Moreover, the myth of ‘negative calorie’ foods has been experimentally refuted: celery still yields a net energy gain of ~24% after accounting for digestion and excretion (Buddemeyer et al., 2019).
3. Food matrix and processing change energy bioavailability – but not always as assumed
Raw starch is poorly digestible; cooking gelatinises it, increasing digestibility and energy yield (Carmody & Wrangham, 2009). Cooling causes retrogradation, reducing available energy. In nuts, intact cell walls lower lipid digestibility (Capuano et al., 2018). More importantly, food texture determines eating rate. Hard foods reduce daily energy intake by ~33% compared to soft foods, independent of processing level (Lasschuijt et al., 2023). Ultra‑processed foods are not inherently problematic; the key drivers are texture, energy density, and eating rate (Valicente et al., 2023).
4. The body defends against weight loss through adaptive thermogenesis
When energy intake is reduced, energy expenditure falls more than predicted by changes in body composition – a phenomenon called adaptive thermogenesis. This average 250–300 kcal/day reduction can exceed 500 kcal/day in some individuals (Dulloo & Schutz, 2015). Spontaneous physical activity (NEAT) decreases, work efficiency increases, and the thermic effect of food is blunted. According to the dual intervention point model, between upper and lower boundaries weight is labile; outside these bounds active physiological defence is engaged (Speakman et al., 2011). This explains why long‑term weight maintenance is so difficult.
5. Processing level (NOVA) has low predictive power without mechanistic drivers
The NOVA classification groups foods by processing, but a systematic review found no consistent mechanism linking processing per se to obesity (Valicente et al., 2023). Low‑calorie sweeteners, for example, are classified as ultra‑processed yet consistently aid weight management. Eating rate and texture explain the higher energy intake often seen with UPFs, not the processing label itself (Lasschuijt et al., 2023). Policy should focus on specific, actionable properties (energy density, eating rate, protein/fibre content) rather than taxonomic categories.
References
- Alberts, B., Heald, R., Johnson, A., Morgan, D., Raff, M., Roberts, K. & Walter, P. (2022). Molecular Biology of the Cell. 7th ed. New York: W. W. Norton & Company.
- Aragon, A.A., Schoenfeld, B.J., Wildman, R., Kleiner, S., VanDusseldorp, T., Taylor, L., Earnest, C.P., Arciero, P.J., Wilborn, C., Kalman, D.S., Stout, J.R., Willoughby, D.S., Campbell, B., Arent, S.M., Bannock, L., Smith-Ryan, A.E. and Antonio, J. (2017) ‘International society of sports nutrition position stand: diets and body composition’, Journal of the International Society of Sports Nutrition, 14(1), p. 16. DOI: 10.1186/s12970-017-0174-y PubMed
- Baer, D.J., Gebauer, S.K. and Novotny, J.A. (2016) ‘Walnuts consumed by healthy adults provide less available energy than predicted by the Atwater factors’, Journal of Nutrition, 146, pp. 9–13. DOI: 10.3945/jn.115.217372 PubMed
- Bernan (Food and Agriculture Organization of the United Nations). (2004). Food energy – methods of analysis and conversion factors. Report of a technical workshop. FAO Food and Nutrition Paper No. 77. Rome: FAO.
- Bosy-Westphal, A., Hägele, F.A. and Müller, M.J. (2021) ‘What is the impact of energy expenditure on energy intake?’, Nutrients, 13(10), p. 3508. DOI: 10.3390/nu13103508 PubMed
- Buddemeyer, K.M., Alexander, A.E. & Secor, S.M. (2019) ‘Negative calorie foods: an empirical test of the hypothesis using bearded dragons’, Journal of Experimental Biology (manuscript). [No DOI available].
- Capuano, E., Oliviero, T., Fogliano, V. and Pellegrini, N. (2018) ‘Role of the food matrix and digestion on calculation of the actual energy content of food’, Nutrition Reviews, 76(4), pp. 274–289. DOI: 10.1093/nutrit/nux072 PubMed
- Carmody, R.N. and Wrangham, R.W. (2009) ‘The energetic significance of cooking’, Journal of Human Evolution, 57(4), pp. 379-391. DOI: 10.1016/j.jhevol.2009.02.011 PubMed
- Carreiro, A.L., Dhillon, J., Gordon, S., Jacobs, A.G., Higgins, K.A., McArthur, B.M., Redan, B.W., Rivera, R.L., Schmidt, L.R. & Mattes, R.D. (2016). ‘The Macronutrients, Appetite, and Energy Intake’. Annual Review of Nutrition, 36, pp.73–103. DOI: 10.1146/annurev-nutr-121415-112624 PubMed
- Corsetti, G., Pasini, E., Scarabelli, T.M., Romano, C., Singh, A., Scarabelli, C.C. and Dioguardi, F.S. (2024) ‘Importance of energy, dietary protein sources, and amino acid composition in the regulation of metabolism: an indissoluble dynamic combination for life’, Nutrients, 16(15), p. 2417. DOI: 10.3390/nu16152417 PubMed
- Dirks, B., Krajmalnik-Brown, R., Corbin, K.D., Carnero, E.A., ... & Davis, T.L. (2025). 'Methanogenesis associated with altered microbial production of short-chain fatty acids and human-host metabolizable energy'. The ISME Journal 2025, 19(1), wraf103. DOI: 10.1093/ismejo/wraf103 PubMed
- Dulloo, A.G. and Schutz, Y. (2015) ‘Adaptive Thermogenesis in Resistance to Obesity Therapies: Issues in Quantifying Thrifty Energy Expenditure Phenotypes in Humans’, Current Obesity Reports, 4(2), pp. 193-202. DOI: 10.1007/s13679-015-0156-9 PubMed
- EFSA Panel on Dietetic Products, Nutrition and Allergies (NDA). (2013). ‘Scientific Opinion on Dietary Reference Values for energy’. EFSA Journal, 11(1), 3005. DOI: 10.2903/j.efsa.2013.3005 PubMed
- Elia, M. & Cummings, J.H. (2007). ‘Physiological aspects of energy metabolism and gastrointestinal effects of carbohydrates’. European Journal of Clinical Nutrition, 61(Suppl 1), pp.S40–S74. DOI: 10.1038/sj.ejcn.1602938 PubMed
- FAO (2004) ‘Food energy – methods of analysis and conversion factors’, FAO Food and Nutrition Paper, No. 77. Rome: FAO. (Файл ‘Bernan 2004.pdf’).
- Feinman, R.D. & Fine, E.J. (2004) ‘“A calorie is a calorie” violates the second law of thermodynamics’, Nutrition Journal, 3, 9. DOI: 10.1186/1475-2891-3-9 PubMed
- Feinman, R.D. & Fine, E.J. (2007) ‘Nonequilibrium thermodynamics and energy efficiency in weight loss diets’, Theoretical Biology and Medical Modelling, 4, 27. DOI: 10.1186/1742-4682-4-27 PubMed
- Fernández-Verdejo, R., Sanchez-Delgado, G. and Ravussin, E. (2024) ‘Energy expenditure in humans: principles, methods, and changes throughout the life course’, Annual Review of Nutrition, 44, pp. 51-76. DOI: 10.1146/annurev-nutr-062122-031443 PubMed
- Finlay, A., Jones, A., Thorp, P., Putra, I.G.N.E., Polden, M., Adams, J., Brealey, J. & Robinson, E. (2025) ‘Accuracy of menu calorie labelling in the England out-of-home food sector during 2024: assessment of a national food policy’, British Journal of Nutrition, 133, pp. 1–9. DOI: 10.1017/S0007114525105217 PubMed
- Grundy, M.M.-L., Edwards, C.H., Mackie, A.R., Gidley, M.J., Butterworth, P.J. and Ellis, P.R. (2016) ‘Re-evaluation of the mechanisms of dietary fibre and implications for macronutrient bioaccessibility, digestion and postprandial metabolism’, British Journal of Nutrition, 116(5), pp. 816-833. DOI: 10.1017/S0007114516002610 PubMed
- Heymsfield, S.B., Smith, B., Dahle, J., Kennedy, S., Fearnbach, N., Thomas, D.M., Bosy-Westphal, A. & Miller, M.J. (2021). ‘Resting Energy Expenditure: From Cellular to Whole-Body Level, a Mechanistic Historical Perspective’. Obesity, 29(3), pp.500–511. DOI: 10.1002/oby.23090 PubMed
- Heymsfield, S.B., Peterson, C.M., Bourgeois, B., Thomas, D.M., Gallagher, D., Strauss, B., Müller, M.J. and Bosy-Westphal, A. (2018) ‘Human energy expenditure: advances in organ-tissue prediction models’, Obesity Reviews, 19(9), pp. 1177-1188. DOI: 10.1111/obr.12718 PubMed
- Hopper, Z., Desbrow, B., Roberts, S. and Irwin, C. (2023) ‘Preparation procedures of food and beverage samples for oxygen bomb calorimetry: a scoping review and reporting checklist’, Journal of Food and Drug Analysis, 31(2), pp. 1–13. DOI: 10.38212/2224-6614.3461 PubMed
- Kenny, G.P., Notley, S.R. & Gagnon, D. (2017). ‘Direct calorimetry: a brief historical review of its use in the study of human metabolism and thermoregulation’. European Journal of Applied Physiology, 117, pp.1765–1785. DOI: 10.1007/s00421-017-3670-5 PubMed
- Khalid, W., Maggiolino, A., Kour, J., Arshad, M.S., Aslam, N., Afzal, M.F., Meghwar, P., Zafar, K.-u.-W., De Palo, P. and Korma, S.A. (2023) ‘Dynamic alterations in protein, sensory, chemical, and oxidative properties occurring in meat during thermal and non-thermal processing techniques: A comprehensive review’, Frontiers in Nutrition, 9, 1057457. DOI: 10.3389/fnut.2022.1057457 PubMed
- Lasschuijt, M., Camps, G., Mars, M., Siebelink, E., de Graaf, K. and Bolhuis, D. (2023) ‘Speed limits: the effects of industrial food processing and food texture on daily energy intake and eating behaviour in healthy adults’, European Journal of Nutrition, 62, pp. 2949-2962. DOI: 10.1007/s00394-023-03202-z PubMed
- Lazzer, S., Bedogni, G., Lafortuna, C.L., Marazzi, N., Busti, C., Galli, R., De Col, A., Agosti, F. and Sartorio, A. (2010) ‘Relationship between basal metabolic rate, gender, age, and body composition in 8,780 white obese subjects’, Obesity, 18(1), pp. 71-78. DOI: 10.1038/oby.2009.162 PubMed
- Liu, Y., Liu, F., Yu, W., Xiao, Y., Liu, D., Li, Z., Chen, W., Gao, F. & Le, S. (2025) ‘Validity of four low-cost smartwatches in estimating energy expenditure during cycling in Chinese untrained women’, PLoS ONE, 20(9), e0331399. DOI: 10.1371/journal.pone.0331399 PubMed
- Livesey, G. (1995) ‘Prediction of energy availability from human diets’, American Journal of Clinical Nutrition, 62(suppl), pp. 1135S–1142S.
- Livesey, G. (2001). ‘A perspective on food energy standards for nutrition labelling’. British Journal of Nutrition, 85(3), pp.271–287. DOI: 10.1079/BJN2000253 PubMed
- Louis, P., Solvang, M., Duncan, S.H., Walker, A.W. and Mukhopadhya, I. (2021) ‘Dietary fibre complexity and its influence on functional groups of the human gut microbiota’, Proceedings of the Nutrition Society, 80(4), pp. 386-397. DOI: 10.1017/S0029665121003694
- Matthews, R.H. (1995) ‘Nutrient Databank perspectives on energy’, American Journal of Clinical Nutrition, 62 (suppl), pp. 1147S–1150S. DOI: 10.1093/ajcn/62.5.1147S PubMed
- NASEM (National Academies of Sciences, Engineering, and Medicine) (2023) Dietary Reference Intakes for Energy. Washington, DC: The National Academies Press. DOI: 10.17226/26818 PubMed
- Neufer, P.D. (2018). ‘The Bioenergetics of Exercise’. Cold Spring Harbor Perspectives in Medicine, 8(1), a029660. DOI: 10.1101/cshperspect.a029678 PubMed
- Nikodijevic, C.J., Probst, Y.C., Tan, S.-Y. & Neale, E.P. (2023). 'The Metabolizable Energy and Lipid Bioaccessibility of Tree Nuts and Peanuts: A Systematic Review with Narrative Synthesis of Human and In Vitro Studies'. Advances in Nutrition, 14, pp.796-818. DOI: 10.1016/j.advnut.2023.03.006 PubMed
- Prentice, A.M. (2005) ‘Macronutrients as sources of food energy’, Public Health Nutrition, 8(7A), pp. 932–939. DOI: 10.1079/PHN2005779 PubMed
- Protasoni, M. & Zeviani, M. (2021). ‘Mitochondrial Structure and Bioenergetics in Normal and Disease Conditions’. International Journal of Molecular Sciences, 22(2), 586. DOI: 10.3390/ijms22020586 PubMed
- Ribeiro, F.L. & Pereira, W.R.L.S. (2022). ‘A gentle introduction to scaling relations in biological systems’. Revista Brasileira de Ensino de Física, 44, e20210219. DOI: 10.1590/1806-9126-RBEF-2021-0291
- Roager, H.M. & Christensen, L.H. (2022). 'Personal diet–microbiota interactions and weight loss'. Proceedings of the Nutrition Society, 81, pp.243-252. DOI: 10.1017/S0029665122000805 PubMed
- Sánchez-Peña, J., Márquez-Sandoval, F., Ramírez-Anguiano, A.C., Velasco-Ramírez, S.F., Macedo-Ojeda, G. and González-Ortiz, L.J. (2017) ‘Calculating the metabolizable energy of macronutrients: a critical review of Atwater's results’, Nutrition Reviews, 75(1), pp. 37–48. DOI: 10.1093/nutrit/nuw044 PubMed
- Schutz, Y. (2000) ‘Role of substrate utilization and thermogenesis on body-weight control with particular reference to alcohol’, Proceedings of the Nutrition Society, 59, pp. 511–517. DOI: 10.1017/S0029665100000744 PubMed
- Speakman, J.R. and Hall, K.D. (2023) ‘Models of body weight and fatness regulation’, Philosophical Transactions of the Royal Society B, 378(1875), p. 20220231. DOI: 10.1098/rstb.2022.0231 PubMed
- Tzeravini, E., Tentolouris, A., Kokkinos, A., Tentolouris, N. and Katsilambros, N. (2024) ‘Diet induced thermogenesis, older and newer data with emphasis on obesity and diabetes mellitus - A narrative review’, Metabolism Open, 22, 100291. DOI: 10.1016/j.metop.2024.100291 PubMed
- Valicente, V.M., Peng, C.-H., Pacheco, K.N., Lin, L., Kielb, E.I., Dawoodani, E., Abdollahi, A. & Mattes, R.D. (2023) ‘Ultraprocessed Foods and Obesity Risk: A Critical Review of Reported Mechanisms’, Advances in Nutrition, 14(6), pp. 1497–1511. DOI: 10.1016/j.advnut.2023.04.006 PubMed
- van Boekel, M., Fogliano, V., Pellegrini, N., Stanton, C., Scholz, G., Lalljie, S., Somoza, V., Knorr, D., Jasti, P.R. & Eisenbrand, G. (2010). 'A review on the beneficial aspects of food processing'. Molecular Nutrition & Food Research, 54, pp.1215-1247. DOI: 10.1002/mnfr.200900608 PubMed
- Westerterp, K.R. (2004) ‘Diet induced thermogenesis’, Nutrition & Metabolism, 1(1), p. 5. DOI: 10.1186/1743-7075-1-5 PubMed
- Yoshimura, E., et al. (2026) ‘Digestible and metabolizable energy intake in humans: a systematic review of bomb calorimetry studies’, Advances in Nutrition, 17, 100597. DOI: 10.1016/j.advnut.2026.100597 PubMed
- Zou, M.L., Moughan, P.J., Awati, A. and Livesey, G. (2007) ‘Accuracy of the Atwater factors and related food energy conversion factors with low-fat, high-fiber diets when energy intake is reduced spontaneously’, American Journal of Clinical Nutrition, 86, pp. 1649–1656. DOI: 10.1093/ajcn/86.5.1649 PubMed
